• Categories:Industry news
• Author:
• Origin:
• Time of issue:2018-07-14 20:09
• Views:

(Summary description)Nowadays, more and more families choose to install the water heating geothermal floor when they are decorating, but due to the higher maintenance requirements of the water heating geothermal floor, consumers must pay more attention to the details when they are paving and using it, especially in the week when the central heating is about to start, they should pay more attention to the debugging of the geothermal floor at home. The first use of heating should be gradual When using geothermal heating for the first time, we should pay attention to heating slowly. When it is used for the first time, the temperature should be gradually increased in the first three days: the water temperature is 18 ℃ in the first day, 25 ℃ in the second day, 30 ℃ in the third day, and it can rise to the normal temperature in the fourth day, that is, the water temperature is 45 ℃, and the surface temperature is 28 ℃ - 30 ℃. Can not heat up too fast, too fast, the floor may be due to expansion cracking distortion phenomenon. When the geothermal heating system is used again after a long time, it is necessary to raise the temperature strictly according to the heating program as it was used for the first time. Avoid dryness and pay attention to monitoring indoor humidity In winter, the climate is dry, coupled with the use of geothermal heating, the floor is easy to crack under the condition of high temperature for a long time. At this time, it is necessary for the owner to humidify the room to avoid the floor cracking and deformation. When decorating, attention should be paid not to punch holes and nails on the ground, so as to avoid leaking geothermal pipelines, resulting in water leakage of geothermal system and scrapping of floor soaking water. Because the temperature of the floor surface is relatively high, it's better not to place water containers and porcelain on the ground directly in the room, so as to avoid uneven heating, which will lead to "flooding the Golden Mountain" in the home. The ground temperature should not be too high during use It should be noted that when using geothermal heating, the surface temperature should not exceed 28 ℃, and the water pipe temperature should not exceed 45 ℃. If it exceeds this temperature, the service life and service cycle of the floor will be affected. General family, winter room temperature reaches 22 ℃ or so, already very comfortable, normal heating words, will not affect the use of geothermal floor.